G.P. Chopper Sculptures

Greg Parigian and I were friends in junior high. Until about 6 years ago, I hadn't seen or talked to him since 1969. If you scroll down in the right column, you'll find a picture of us on our chopped stingrays that was once used for this blog's header. Greg sent a couple of emails with photos the other day. The text below is combination of them explaining the chopper sculptures he made in the 70's.

"Back in the early 70's I made some Harley chopper sculptures. I was selling and trading them for Harley parts to Hells Angels and Satan's Slaves. I would sketch their bike and then make a sculpture of it.

I think I made about 50 of them, but only saved one. I would sign them by putting a "P" on the rear wheel. The sculptures where all about 18" long and 12" tall. They had no bolts or nuts in them, they were all just metal I bought in the metal yard. They were welded together with gas torch and do not remember if I ever brazed any of them.

I was living in Canoga Park at the time and one of my neighbors was a guy they called big Louie. He was then the president of the Satan's Slaves. He rode a really cool bike, a chopped Knucklehead with a extended springer. I made one of his bike that was really nice. Some of them were clear coated. I also made them for other club members. Some of these guys were really scary. But they always paid me or gave me what I wanted in trade. I almost collected enough parts to build a flathead 80". - Greg

Two degrees of separation. Here's a photo of Satan's Slave Louie. I think I grabbed it from the Satan's Crate blog and believe it's from a Easyriders in the 80's. -CK

Anybody out there seen or have or seen one of Greg's sculptures? If you have something like it, look for a "P" or "GP" on the rear wheel.

Mystery Bike Part 3, Bruce's 1st Build

Working from the first post backwards, here's photos of Bruce Parrish's first chopper. This is the same bike that would become the Funny Bike in it's second iteration.

Escape from New York. Bruce bought a complete 1950 Panhead late in 1970 for $100. The frame engine and trans were loaded in the trunk of his friend's Chevelle and they headed for California.


Once in Cali., Bruce stumbled upon Dick Allen's shop, where the bike above, became the inspiration for his build.


Bruce's first mold job.


The proud owner with his freshly finished creation circa 1971.


Nicely detailed motor. Until I asked about it, Bruce had forgot about the chromed barrels. Turn down tips were added to the drag pipes at this point. The hex end bolt forward and highway pegs were made to match the rocker stud bolts of the Dick Allen springer.


Back to New York. Bruce rode his Pan cross country a few times.


Another trip to the east coast in '72. This time with SU carb and 2 into 1 collector exhaust.


Happy Birthday! Bruce said he was never superstitious since his birthday was the 13th. Then, on 1/13/73 (his 23rd birthday), some dude in a Mustang gave him a nasty present. Some might say it's the Green Bike curse. This was the end of the bike as it was and the beginning of the Funny Bike.

Oink Spotting

If your anything like me, you dig checking out bikes in old biker flicks, and also dig Roth's Oink. About a year or so ago I saw this sequence but didn't bookmark it and forgot the film it was from. Recently I found it again and thought I'd share. The film is Run Angel Run. It's a fairly long chase sequence done in a series of split screen shots. All the shots with Oink in frame are pretty quick, so here's the best of them.

You really wouldn't know what bike it is if you didn't see more.


I pasted these frames together as he almost loses it and quickly recovers.


Not sure what frame is better so here's both.


Again you can clearly see the sissy bar's tell tale iron cross.